Hi guys,
I’m having issue with using pkc11 on raspberry pi 5 where sometimes it says no smart card reader found? I’m using Argon PWR GaN USB-C PD, so the power supply should be correct.
Do you have issue raspberry PI integration, to confirm it’s a common problem?
Wil the 45w power supply resolve the issue ? Here’s the power data.
root@sysrefiners:/home/mark/NitroPI# vcgencmd pmic_read_adc EXT5V
3V7_WL_SW_A current(0)=0.06050766A
3V3_SYS_A current(1)=0.15907660A
1V8_SYS_A current(2)=0.28594750A
DDR_VDD2_A current(3)=0.22543980A
DDR_VDDQ_A current(4)=0.01568640A
1V1_SYS_A current(5)=0.20787310A
0V8_SW_A current(6)=0.34352740A
VDD_CORE_A current(7)=1.59847000A
3V3_DAC_A current(17)=0.00000000A
3V3_ADC_A current(18)=0.00012210A
0V8_AON_A current(16)=0.00335775A
HDMI_A current(22)=0.01953600A
3V7_WL_SW_V volt(8)=3.69699300V
3V3_SYS_V volt(9)=3.30724900V
1V8_SYS_V volt(10)=1.81684800V
DDR_VDD2_V volt(11)=1.10219700V
DDR_VDDQ_V volt(12)=0.60402870V
1V1_SYS_V volt(13)=1.10219700V
0V8_SW_V volt(14)=0.79853400V
VDD_CORE_V volt(15)=0.87919330V
3V3_DAC_V volt(20)=3.30311000V
3V3_ADC_V volt(21)=3.29578400V
0V8_AON_V volt(19)=0.79648270V
HDMI_V volt(23)=5.07190000V
EXT5V_V volt(24)=5.03840000V
root@sysrefiners:/home/mark/NitroPI# vcgencmd get_throttled
throttled=0x0
Thanks,
Mark